Next: -general
Up: gd1.pp
Previous: gd1.pp
  Contents
##############################################################################
# Flags: nomenu, noprompt, nomessage, #
##############################################################################
# section: -base #
##############################################################################
# -general -- define database #
# -3darrowplot -- field plots, material plot #
# -lineplot -- lineplot of field components, #
# -glineplot -- lineplot of field comp along gline, #
# -2dplot -- Aquivalue plot of component on a plane. #
# -energy -- compute stored energy #
# -lintegral -- compute voltages #
# -wlosses -- compute wall losses #
# -dlosses -- compute dielectric losses #
# -flux -- compute fluxes through rectangular areas #
# -clouds -- properties of free moving clouds #
# -sparameters -- analyses time history of port mode amplitudes #
# -material -- specify conductivities for loss computations #
# -wakes -- wakepotentials, impedances #
# ***** Miscellanea ****** #
# -totouchstone -- convert fri-data to touchstone form #
# -combine -- Combines scattering parameters #
# -smonitor -- display and fft smonitor data #
# -fexport -- export 3D field data #
# -2dmanygifs -- #
# -3dmanygifs -- #
# -debug -- specify debug levels #
# #
##############################################################################
# ?, help, end, ls #
##############################################################################
-general
:
Branches to the -general section, where you load the database where
gd1
has written its data to.
-3darrowplot
:
Branches to the section -3darrowplot, where you can plot 3D-fields
together with the material-boundaries.
You can also plot the computed portmodes that were used in a
time-domain computation.
-lineplot
:
Branches to the section lineplot, where you can plot selected
components of 3D-Fields along selected lines. The direction of
these lines must be in x-, y- or z-direction.
-glineplot
:
Branches to the section glineplot, where you can plot selected
components of 3D-Fields along selected lines in arbitrary direction.
-2dplot
:
Branches to the section 2dplot, where you can plot selected
components of 3D-Fields over a plane as an aequivalue plot.
-energy
:
Branches to the section -energy, where you can compute the stored energy
in resonant or time dependent fields.
-lintegral
:
Branches to the section lintegral, where you can compute line integrals
of fields.
-wlosses
:
Branches to the section -wlosses, where you can compute wall losses
from magnetic fields via the perturbation formula.
-dlosses
:
Branches to the section -dlosses, where you can compute dielectric losses
from electric or magnetic fields via the perturbation formula.
-flux
:
Branches to the section -flux, where you can compute the flux of a field
through a rectangular area.
-clouds
:
Branches to the section -clouds, where you can analyse results of a PIC
computation.
-sparameters
:
Branches to the section -sparameters, where you can compute and plot
the scattering parameters from the time data that were computed by
gd1.
-material
:
Branches to the section -material, where you specify the conductivities
of electric materials.
These conductivities are used for the perturbation formula that
is applied in the section -losses.
-wakes
:
Branches to the section -wakes, where you can compute longitudinal
and transverse wakepotentials from data that were recorded by
gd1
during a time domain computation with a relativistic charge.
-totouchstone
:
Branches to the section -totouchstone, where you may combine selected
scattering parameters to a full scattering matrix which is stored in
TouchStone-format.
-combine
:
Branches to the section -combine, where you can combine scattering parameters
of different devices to get the scattering parameters of a combined device.
-smonitor
:
Branches to the section -smonitor, where you can analyse results which were
recorded via -smonitor in a previous fdtd computation.
-fexport
:
Branches to the section fexport, where you can export 3DFields to ASCII
files.
-2dmanygifs, -3dmanygifs
:
Allows creation of sets of gif files from data exported from a
time domain computation via -fexport
.
Next: -general
Up: gd1.pp
Previous: gd1.pp
  Contents